Way of dividing the bandwidth of the client computer without any software

Frequency signal power the Internet, where every computer in use or connected to the Internet by the provider will be given the capacity of bandwidth for example: 64 kb / s or 512 Kb / s ff.

For business use like Office and Internet, needs to make the distribution of bandwidth, so that every computer connected to the Internet in one network having equal parts. If there is no bandwidth settings in a network who will be the first to use computers and to download software that large capacity, then the bandwidth will be too big a party to the kumputer direction, while the other computer's internet speed will slow and even may not be able to browse the internet.


There are two methods to control the bandwidth among others:

1. Settings on OS
2. Using Bandwidth Control Software

Which will be discussed here is dividing the bandwidth for the client computer without using a Software

His manner is as follows:

1. Click on start ==> run
2. Then type gpedit.msc, and then after that out of the box "Group Policy"
Three. In the "Computer Configuration", select "Administrative Templates"
4. Then select "Network"
5. Click on the "QoS Packet Scheduler"
6. After that Select At the "Limit reservable bandwidth"
7. Select from "Not Configured" to "Enable"
8. After that, In the table below on the words "Bandwidth Limit%" Change From "20" to "80 or 20", And "Apply", "OK." This setting depends on the number of computers, if we will get the bandwidth settings for each computer 10%, then we just input the number 90%, if we set each computer to be 20%, then we live on the input rate of 80%.

Hopefully Helpful